Archives
If you want how much does hydro-jetting cost, you’re in the right place. Hydro-jetting is a solution almost every sewer professional offers. So, we wrote this article so that you’re not surprised about the price when you call the experts. You’ll also learn how hydro-jetting handles tree roots, how it compares to snaking, and more.
What is Hydro-jetting?
Hydro-jetting is when your sewer pipes are cleaned using up to 4,000 PSI of highly pressurized water. A self-propelled nozzle is fed into a cleanout (a section of pipe with a removable cap) and cuts through everything in its path, including tree roots, sludge, oils, and more. The hydro-jetting hose is connected to a water tank and pressure machine, so there’s no need for heavy machinery or trenches to clean your pipes. Some hydro-jetters even use hot water to help melt down clogs made from fats, oils, and grease.
How Much Does Hydro-jetting Cost?
Hydro-jetting, on average, costs between $300 to upwards of $600 for single-family homes. It depends on a few factors.
- What’s blocking the pipe (i.e., tree roots or sludge).
- The location of the pipe.
- The location of the clog (If it’s near the cleanout, it’s easier to remove).
- The type of job (residential or commercial).
Hydro-jetting vs. Tree Roots
Did you know that tree roots can stretch twice as wide as the tree’s canopy? These roots are searching for new water sources all the time, and if they detect a crack in your sewer pipes, they’ll try to get inside. Older pipes, like Terracotta, are prone to tree root intrusion because of their weak material. Hydro-jetting is the perfect solution for removing invasive tree roots from your sewer lines.
Pay attention to any areas of your yard where the grass seems to be greener or trees appear larger. This could indicate roots are inside your sewer lines, drinking fresh wastewater. This might also cause multiple toilet clogs in your home.
Read more:
Hydro-jetting vs. Snaking
Hydro-jetting is much stronger than a simple plumbing snake. Plumbing snakes only poke holes in blockages, while hydro-jetting can actually flush out clogs. If you want a total sewer line system flush, we recommend hydro-jetting over sewer snakes. Regular snaking does cost less than hydro-jetting, but it doesn’t do as good as a job.
Hydro-jetting vs. Robotic Cutting
If concrete, steel, or thick tree roots have infiltrated your sewer pipes, repair experts might recommend robotic cutting over hydro-jetting. Robotic cutters are incredibly strong, cutting through almost everything, including metal and concrete. They can clear major clogs without trenching through your home or property. Also, robotic cutters can be used to remove collapsed pipelines to make way for new sewer pipes.
Hydro-jetting Pros
Below are six pros of hydro-jetting.
- Effective – Hydro-jetting can clear away tree roots, heavy rocks, bacteria, long-term grease clogs, and other types of fat buildup.
- Environmental friendly – Hydro-jetting only uses pressurized water.
- Non-invasive – Hydro-jetting usually involves zero digging. All experts need to access your pipes is clear access to a cleanout.
- Fast – Hydro-jetting can be completed in under a day.
- Maneuverability – The hydro-jetting hose can navigate through different bends and turns in your sewer system.
- Reveals – Hydro-jetting will expose any cracks or holes in your sewer pipes that were covered with sludge or tree roots.
Hydro-jetting Cons
Here are two cons that come with hydro-jetting.
- Only for cleaning – Hydro-jetting is only for cleaning and can’t fix collapsed sewer pipes.
- Can be too strong – Hydro-jetting can actually be too strong if its pressure isn’t regulated by an expert. Older and severely damaged pipes might accidentally crack or crumble after hydro-jetting. Call in the experts and they will determine if your sewer pipes are strong enough to handle hydro-jetting.
What Comes After Hydro-jetting?
Once your sewer line is cleaned, professionals will be able to tell if your pipes need to be repaired or completely replaced.
- Trenchless sewer repair – If you want quick and non-invasive sewer repair, then we recommend either pipe lining or pipe bursting. Pipe lining involves creating a new pipe directly inside your old one, while pipe bursting involves pushing a new pipe into your old one. Both methods don’t involve any heavy excavation or trenching, making them the perfect solution if you want to avoid potential thousands of dollars in cleanup and restoration costs.
- Traditional sewer repair – Traditional sewer repair usually involves trenching and replacing your old sewer line manually. If your sewer pipes have collapsed, disintegrated, or are back-pitched (they were sloped incorrectly), then experts will have to use traditional trenching methods.
Who Offers Hydro-jetting Near Me?
If you live in Glendora, California, and need hydro-jetting, or you want to know more about hydro-jetting and its benefits, you should call SWE Sewer Solutions & Engineering. We are bonded, city-approved, and licensed. We also offer sewer line repair, replacement, installation, robotic cutting, and more. Call today for your in-depth inspection and estimate.
